410S Stainless Steel Plate Manufacturer & Supplier
410S is low-carbon 410. The reduced carbon suppresses hardening on cooling, so the grade stays ductile and weldable — used where 410's corrosion resistance is wanted without the hardening behaviour.
UNS: S41008 | Category: Martensitic & Precipitation Hardening Stainless
Size Range
Outer Diameter: Thickness 3 - 50 mm · Width 1000-3000 mm · Length 2000-12000 mm
Wall Thickness: 3 - 50 mm
Chemical Composition (%)
| C | Si | Mn | P | S | Cr | Ni |
|---|---|---|---|---|---|---|
| 0.08 max | 1.00 max | 1.00 max | 0.040 max | 0.030 max | 11.50-13.50 | 0.60 max |
Mechanical Properties
- Yield Strength Rp0.2
- 205 MPa min
- Tensile Strength Rm
- 415 MPa min
- Elongation A5
- 22% min
- Hardness
- 183 HB max
Applicable Standards
- ASTM A240 / ASME SA240
- ASTM A480
- EN 10088-2
- JIS G4304 / G4305
- EN 10204 3.1 certification
Applications
- Refinery and petrochemical linings
- Annealing boxes & trays
- Ore processing equipment
- Heat exchanger shells
- Structural stainless members
Industries Served
- Oil & Gas
- Chemical & Petrochemical
- Cement & Minerals
Equivalent Grades
- EN
- 1.4000 / X6Cr13
- JIS
- SUS 410S
- UNS
- S41008